Comments for Tim BirdTim Bird

Comment on Contact by Website Redesign | Tim Bird

Website Redesign | Tim Bird — Sun, 12 Feb 2012 14:49:23 +0000

[...] usual Skip to primary content Skip to secondary content BlogTim BirdCareer AchievementsCalendarContactHints and TipsSoftware Hints and TipsBasic HTMLSolidWorks Hints and TipsAutoCAD / DWG Editor / [...]

Comment on TIG Electrodes by Two New Pages Added | Tim Bird

Two New Pages Added | Tim Bird — Sat, 28 Jan 2012 15:43:59 +0000

[...] covered in the stuffSheet Metal & Welding Hints and TipsDrilling a round hole in sheet metalTIG ElectrodesCyclingCalendar Search [...]

Comment on Special Characters ±, °… by Peter Richards

Peter Richards — Wed, 25 Jan 2012 10:54:55 +0000

Thanks for the info. Very useful, but still looking for the code for the earth/ground symbol. Cut and pasted an image in the end.

Comment on Basic HTML by New Page Added | Tim Bird

New Page Added | Tim Bird — Sat, 21 Jan 2012 16:40:57 +0000

[...] from beyond the usual Skip to content HomeContactAbout TimCareer AchievementsEngineeringSoftwareBasic HTMLSolidWorks Hints and TipsAutoCAD / DWG Editor / DraftSightWindows Hints and TipsGeneral Hints and [...]

Comment on Manual Lathe Hints and Tips by Rodolfo Mckerlie

Rodolfo Mckerlie — Fri, 23 Dec 2011 01:01:44 +0000

Thanks for the interesting read

Comment on South Downs Way 2011 by Nike Zapatillas

Nike Zapatillas — Thu, 01 Dec 2011 18:22:57 +0000

Thanks for ones marvelous posting! I quite enjoyed reading it, you might be a great author.I will be sure to bookmark your blog and will often come back from now on. I want to encourage yourself to continue your great writing, have a nice day!

Comment on Drilling a round hole in sheet metal by Przewozy Autokarowe

Przewozy Autokarowe — Tue, 22 Nov 2011 01:25:24 +0000

Hey very nice website!! Man .. Beautiful .. Amazing .. I’ll bookmark your blog and take the feeds also…I am happy to find so many useful information here in the post, we need work out more techniques in this regard, thanks for sharing. . . . . .

Comment on Workshop Hints & Tips by buy provera

buy provera — Wed, 26 Oct 2011 01:44:41 +0000

Thank you so much for this blog! Information that I found here was very usefull for me=)

Comment on Easy Turning Tool Set Up by Lyzbeth

Lyzbeth — Thu, 20 Oct 2011 12:34:22 +0000

Finally! This is just what I was lkonoig for.

Comment on Drilling a round hole in sheet metal by Teddy Allin

Teddy Allin — Thu, 20 Oct 2011 12:19:22 +0000

You are a very clever person!